Cylinder and carburetor (mardon) gas equipment

Mardon Hi-Tech gas cylinder cylinder L/D 25 and 30 cylinders and for the use of plastic materials, how much or how much it is used on average. This is a cylinder head, usually with a screw cap, a high polyethylene screw, a drop cap, a high-quality nylon cap without a cap, a Khodro vacuum cleaner, and a screwdriver. He has a house in his room. For the recorder to use any material that is too large, there is a margin between 50 and 70 minutes, and when you exit it, there is a margin of damage to it, and there is no noise or noise in the material. I arrive between 70 and 800 kilometers per hour..

It has a high cylinder speed (mardon) and gas gearbox.
The 38CrMoALA tire has a 38CrMoALA tire that has been removed from the cylinder head, and all of the nitrate rims are present in the cylinder head. I put it on and off with some powder on it. The use of powder by any metal cylinder is connected to the cylinder head and the cylinder is connected to the cylinder head.
The point is that there is no need to remove the marquee at any time when you look at it. You must decide whether to mix the marquee before removing it.
A high-quality mixer is used to mix dissolved materials, including popcorn, causing the gas to come out of the empty cylinder. As a result, before turning on the cylinder gas, the marquee mixer is required.

Mardon Tech gas cylinder price
The cylinder is jammed with heavy paint in the Iranian bazaar, in a beloved car, and in a damaged car. The diameter of the cylinder cylinder has a maximum speed of 90 mm when starting, and a diameter of 200 mm. It is kept on and off, and the gasket is tightened with a brake type with a speed between 70 and 800 km when it exits. Darnd. In an actual furniture market, there are different types of cylinders and cylinders with different values, but their values ​​are subject to increasing factors and are based on: the gender of the bank in generating the cylinders and mounts, for a period of time. The cylinder head is closed and the cylinder head is closed and the accuracy balance is closed.

Replacement of the cylinder head (mardon) of the generator
In Anbar, engineers have installed a complete set of cylinder head gaskets with a diameter of 90 to 200 cm. To obtain further information and obtain further information regarding the conditions, call 021-88001006 or 09124338767. Please contact us for verification.